MINI ORB®

Colours

Product Description and Features

MINI ORB® is a mini-corrugated profile which is suitable for use in interior or exterior applications on straight or curved surfaces. It has the same traditional shape as CUSTOM ORB® but on a much reduced scale.  Its subtle profile is a perfect complement to other claddings to provide a "contrasting" surface as an accent feature. It is primarily used for decorative finishes on walls, ceilings and soffit linings; feature walls and partitions; and screens and small awnings not subject to any foot traffic.

• Able to be used for both straight and curved applications
• Can be used with the corrugations running vertically or horizontally
• Can be laid flat, pre-curved, or spring-curved for increased versatility
• Available in a wide variety of COLORBOND® steel colours and ZINCALUME® steel

Note:

• MINI ORB® is only suitable in for use for walling in non-cyclonic areas

Specifications

Lengths and Tolerance

Sheets are supplied custom cut.

Tolerances

Length: +5mm, -5mm
Width: +2mm, -2mm

Material Specifications

• ZINCALUME® steel made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m² minimum coating mass)
• COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m² minimum coating mass) or AZ200 (200g/m² minimum coating mass), or
• COLORBOND® prepainted steel complying with AS/NZS 2728:Type 6, is made from stainless steel complying with JIS G 4305, Grade 430 stainless steel, 430SS550. Subject to enquiry, or
• The base metal thickness is 0.42mm  (0.48mm BMT available subject to enquiry)

Curving information

MINI ORB® may be spring curved down to 1500mm radius. It is suitable for pre-curving - the minimum radius of curve is 150mm, and the minimum straight length after a curve is 50mm. Some possible profiles are shown on the left.

Configurations

ROOFTRAK® is supplied in kits that include components and fixings. The basic ROOFTRAK® "plank" is 224mm wide. The ROOFTRAK® 450 system uses two planks (total 450mm wide); ROOFTRAK® 675 uses three planks (total 675mm wide). For further details of the kits available.

Schematic

Availablibity

FAQs

Is MINI ORB® the same product that has been available for many years?

The product was changed in 1997. The old MINI ORB® product was wider, thicker (thus heavier and more expensive) and manufactured from soft steel. The older product was also limited to a maximum length of 3000mm.