KLIP-LOK® 406
 |
 |
Colours
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Description and Features
KLIP-LOK® 406 is a strong, durable and versatile long length roof or wall cladding. The concealed fastening method enables its use on many applications from low pitched roofs to vertical or horizontal ribbed walling.
- Fixing clips effectively secure KLIP-LOK® 406 to supports without puncturing the sheet
- No exposed fasteners means clean and smooth lines
Note
- KLIP-LOK® 406 is only available upon enquiry in some states. Please consult the availability table below for further details
- Minimum recommended roof pitch is 1 degree (1 in 50)
Span Table
The maximum recommended support spacings are based on testing in accordance with AS1562.1-1992, AS4040.0-1992 and AS4040.1-1992.
Roof spans consider both resistance to wind pressure and light roof traffic (traffic arising from incidental maintenance) and assessment of ease of installation.
| Maximum Support Spacings (mm) | |
| Type of Span | Thickness (mm) BMT |
| 0.48 | |
| Roof | |
| Single Span | 1500 |
| End Span | 1800 |
| Internal Span | 2100 |
| Unstiffened Eaves Overhang | 200 |
| Stiffened Eaves Overhang | 600 |
- Table data are based on supports of 1mm BMT.
- The data is governed by the ease of side lapping of the sheets at long spans.
Specification
Lengths
Sheets are supplied custom cut.
Tolerance
Length: +0 mm, -15 mm
Width: +4 mm, -4 mm
Material Specification
The base materials are ZINCALUME® steel, galvanised and stainless steels. AQUAPLATE® polymer coated steel is used for water tanks.
- ZINCALUME® steel made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass), or
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 6, is made from stainless steel complying with JIS G 4305, Grade 430 stainless steel, 430SS550. Subject to enquiry
- The base metal thickness is 0.48mm
Physical Properties
| Mass and Yield |
||||||
| Thickness (mm BMT) | COLORBOND® steel | ZINCALUME® steel | ||||
| kg/m | kg/m2 | m2/t | kg/m | kg/m2 | m2/t | |
| 0.48 | 2.32 | 5.71 | 175 | 2.28 | 5.62 | 178 |
Schematic
Availablibity
| NSW/ACT | VIC | TAS | QLD | NT | SA | WA |
| Avail. | Avail. | Avail. | By Enquiry* | Avail. | Not Avail. | By Enquiry* |
FAQs
Can KLIP-LOK 700 HI-STRENGTH® be side-lapped with KLIP-LOK® 406?
No. KLIP-LOK 700 HI-STRENGTH® has a rib shape and clip design different to the traditional KLIP-LOK® 406.
Can KLIP-LOK® 406 be unclipped?
It is not recommended to unclip KLIP-LOK® 406 once the cladding is installed. Unclipping can damage the clips, cladding or metallic coating on the cladding. It is difficult to assess how KLIP-LOK® 406 will perform after such damage.
What is cladding and how does it relate to roofing and walling?
Cladding is a collective term for any sheeting that covers a building, whether it be on the roof of the building, or on the walls. Roof cladding is made from thicker steel and is rolled to a profile capable of supporting roof traffic*. In most cases, these roof claddings can also be used for walling as well. Wall cladding is made from thinner steel, rolled to a less rigid profile. They are generally not capable of supporting roof traffic, prohibiting their use as roofing.
*Some roofing is designed to be non-trafficable. Please consult the span and capacity tables of the cladding for further details.